(资料图片仅供参考)

首先在.pro文件中添加以下代码：

CONFIG += \qaxcontainer #.接下来就是Excel代码：cpp文件：#include ""#include "qt_"QExcelEngine::QExcelEngine(){pExcel = NULL;pWorkbooks = NULL;pWorkbook = NULL;pWorksheet = NULL;sXlsFile = "";nRowCount = 0;nColumnCount = 0;nStartRow = 0;nStartColumn = 0;bIsOpen = false;bIsValid = false;bIsANewFile = false;bIsSaveAlready = false;HRESULT r = OleInitialize(0);if (r != S_OK && r != S_FALSE){qDebug("Qt: Could not initialize OLE (error %x)", (unsigned int)r);}}QExcelEngine::QExcelEngine(QString xlsFile){pExcel = NULL;pWorkbooks = NULL;pWorkbook = NULL;pWorksheet = NULL;sXlsFile = xlsFile;nRowCount = 0;nColumnCount = 0;nStartRow = 0;nStartColumn = 0;bIsOpen = false;bIsValid = false;bIsANewFile = false;bIsSaveAlready = false;HRESULT r = OleInitialize(0);if (r != S_OK && r != S_FALSE){qDebug("Qt: Could not initialize OLE (error %x)", (unsigned int)r);}}QExcelEngine::~QExcelEngine(){if ( bIsOpen ){//析构前，先保存数据，然后关闭workbookClose();}OleUninitialize();}/***@brief 打开sXlsFile指定的excel报表*@return true : 打开成功* false: 打开失败*/bool QExcelEngine::Open(int nSheet, bool visible){if ( bIsOpen ){Close();}nCurrSheet = nSheet;bIsVisible = visible;if ( NULL == pExcel ){pExcel = new QAxObject(""); //连接Excel控件if ( pExcel ){bIsValid = true;}else{bIsValid = false;bIsOpen = false;return bIsOpen;}pExcel->dynamicCall("SetVisible(bool)", bIsVisible); //bIsVisible 是否显示窗体pExcel->setProperty("DisplayAlerts", false); //不显示任何警告信息pWorkbooks = pExcel->querySubObject("WorkBooks"); //获取工作簿}if ( !bIsValid ){bIsOpen = false;return bIsOpen;}if ( () ){bIsOpen = false;return bIsOpen;}//如果指向的文件不存在，则需要新建一个QFile f(sXlsFile);if (!()){bIsANewFile = true;}else{bIsANewFile = false;}if (!bIsANewFile){pWorkbook = pWorkbooks->querySubObject("Open(QString, QVariant)", sXlsFile, QVariant(0)); //打开xls对应的工作簿}else{pWorkbooks->dynamicCall("Add"); //添加一个新的工作薄pWorkbook = pExcel->querySubObject("ActiveWorkBook"); //新建一个xls}pWorksheet = pWorkbook->querySubObject("WorkSheets(int)", nCurrSheet);//打开第一个sheet//至此已打开，开始获取相应属性QAxObject *usedrange = pWorksheet->querySubObject("UsedRange");//获取该sheet的使用范围对象QAxObject *rows = usedrange->querySubObject("Rows");QAxObject *columns = usedrange->querySubObject("Columns");//因为excel可以从任意行列填数据而不一定是从0,0开始，因此要获取首行列下标nStartRow = usedrange->property("Row").toInt(); //第一行的起始位置nStartColumn = usedrange->property("Column").toInt(); //第一列的起始位置nRowCount = rows->property("Count").toInt(); //获取行数nColumnCount = columns->property("Count").toInt(); //获取列数bIsOpen = true;return bIsOpen;}/***@brief Open()的重载函数*/bool QExcelEngine::Open(QString xlsFile, int nSheet, bool visible){sXlsFile = xlsFile;nCurrSheet = nSheet;bIsVisible = visible;return Open(nCurrSheet,bIsVisible);}/***@brief 保存表格数据，把数据写入文件*/void QExcelEngine::Save(){if ( pWorkbook ){if (bIsSaveAlready){return ;}if (!bIsANewFile){pWorkbook->dynamicCall("Save()");}else /*如果该文档是新建出来的，则使用另存为COM接口*/{// pWorkbook->dynamicCall("SaveAs (const QString&,int,const QString&,const QString&,bool,bool)",// sXlsFile,56,QString(""),QString(""),false,false);pWorkbook->dynamicCall("SaveAs(const QString&)", sXlsFile);}bIsSaveAlready = true;}}/***@brief 关闭前先保存数据，然后关闭当前Excel COM对象，并释放内存*/void QExcelEngine::Close(){//关闭前先保存数据// Save();if ( pExcel && pWorkbook ){pWorkbook->dynamicCall("Close(bool)", true);pExcel->dynamicCall("Quit()");delete pExcel;pExcel = NULL;bIsOpen = false;bIsValid = false;bIsANewFile = false;bIsSaveAlready = true;}}/***@brief 把tableWidget中的数据保存到excel中*@param tableWidget : 指向GUI中的tablewidget指针*@return 保存成功与否 true : 成功* false: 失败*/bool QExcelEngine::SaveDataFrTable(QTableWidget *tableWidget){if ( NULL == tableWidget ){return false;}if ( !bIsOpen ){return false;}int tableR = tableWidget->rowCount();int tableC = tableWidget->columnCount();//获取表头写做第一行for (int i=0; ihorizontalHeaderItem(i) != NULL ){this->SetCellData(1, i+1, tableWidget->horizontalHeaderItem(i)->text());}}//写数据for (int i=0; iitem(i,j) != NULL ){this->SetCellData(i+2, j+1, tableWidget->item(i,j)->text());}}}//保存Save();return true;}/***@brief 从指定的xls文件中把数据导入到tableWidget中*@param tableWidget : 执行要导入到的tablewidget指针*@return 导入成功与否 true : 成功* false: 失败*/bool QExcelEngine::ReadDataToTable(QTableWidget *tableWidget){if ( NULL == tableWidget ){return false;}//先把table的内容清空int tableColumn = tableWidget->columnCount();tableWidget->clear();for (int n=0; nremoveColumn(0);}int rowcnt = nStartRow + nRowCount;int columncnt = nStartColumn + nColumnCount;//获取excel中的第一行数据作为表头QStringList headerList;for (int n = nStartColumn; nquerySubObject("Cells(int,int)", nStartRow, n);if ( cell ){headerList << cell->dynamicCall("Value2()").toString();}}//重新创建表头tableWidget->setColumnCount(nColumnCount);tableWidget->setHorizontalHeaderLabels(headerList);//插入新数据for (int i = nStartRow + 1, r = 0; i < rowcnt; i++, r++ ) //行{tableWidget->insertRow(r); //插入新行for (int j = nStartColumn, c = 0; j < columncnt; j++, c++ ) //列{QAxObject * cell = pWorksheet->querySubObject("Cells(int,int)", i, j );//获取单元格//在r新行中添加子项数据if ( cell ){tableWidget->setItem(r,c,new QTableWidgetItem(cell->dynamicCall("Value2()").toString()));tableWidget->item(r, c)->setTextAlignment(Qt::AlignCenter);}}}return true;}/***@brief 获取指定单元格的数据*@param row : 单元格的行号*@param column : 单元格的列号*@return [row,column]单元格对应的数据*/QVariant QExcelEngine::GetCellData(int row, int column){QVariant data;QAxObject *cell = pWorksheet->querySubObject("Cells(int,int)",row,column);//获取单元格对象if ( cell ){data = cell->dynamicCall("Value2()");}return data;}/***@brief 修改指定单元格的数据*@param row : 单元格的行号*@param column : 单元格指定的列号*@param data : 单元格要修改为的新数据*@return 修改是否成功 true : 成功* false: 失败*/bool QExcelEngine::SetCellData(int row, int column, QVariant data){bool op = false;QAxObject *cell = pWorksheet->querySubObject("Cells(int,int)",row,column);//获取单元格对象if ( cell ){QString strData = (); //excel 居然只能插入字符串和整型，浮点型无法插入cell->dynamicCall("SetValue(const QVariant&)",strData); //修改单元格的数据op = true;}else{op = false;}return op;}/*** @brief 清空整个Excel表格*/void QExcelEngine::ClearAllData(QString strData){for (int i=0; iSetCellData(i, j, strData);}}//保存Save();}/***@brief 清空除报表之外的数据*/void QExcelEngine::Clear(){sXlsFile = "";nRowCount = 0;nColumnCount = 0;nStartRow = 0;nStartColumn = 0;}/***@brief 判断excel是否已被打开*@return true : 已打开* false: 未打开*/bool QExcelEngine::IsOpen(){return bIsOpen;}/***@brief 判断excel COM对象是否调用成功，excel是否可用*@return true : 可用* false: 不可用*/bool QExcelEngine::IsValid(){return bIsValid;}/***@brief 获取excel的行数*/int QExcelEngine::GetRowCount() const{return nRowCount;}/***@brief 获取excel的列数*/int QExcelEngine::GetColumnCount() const{return nColumnCount;}

.h文件：

#include #include #include #include #include #include class QExcelEngine{public:QExcelEngine();QExcelEngine(QString xlsFile);~QExcelEngine();public:bool Open(int nSheet, bool visible);bool Open(QString xlsFile, int nSheet, bool visible);void Save();void Close();bool SaveDataFrTable(QTableWidget *tableWidget);bool ReadDataToTable(QTableWidget *tableWidget);QVariant GetCellData(int row, int column);bool SetCellData(int row, int column, QVariant data);void ClearAllData(QString strData);void Clear();bool IsOpen();bool IsValid();int GetRowCount() const;int GetColumnCount() const;private:QAxObject *pExcel;QAxObject *pWorkbooks;QAxObject *pWorkbook;QAxObject *pWorksheet;QString sXlsFile;int nRowCount;int nColumnCount;int nStartRow;int nStartColumn;int nCurrSheet;bool bIsVisible;bool bIsOpen;bool bIsValid;bool bIsANewFile;bool bIsSaveAlready;};

接下来就是调用了，首先从Excel表格导入到tableWeight，我这里是点击按钮实现，代码如下：

void QEnteringWidget::slotExcelInto(){QMessageBox::StandardButton rb = QMessageBox::information(this, "warning", "从excel文件中导入数据将会覆盖之前所有内容，
确定导入吗？",QMessageBox::Yes | QMessageBox::No, QMessageBox::Yes);if(rb == QMessageBox::Yes){//从Excel中将表格导入到TableWidgetexcelEngine = new QExcelEngine;m_fileName = QFileDialog::getOpenFileName(this, tr("select file"), "../datafile/", tr("*.xls *.xlsx"));if(m_())return;();bool b = excelEngine->Open(m_fileName, 1, false); //flase为不显示窗体if(b == false){QMessageBox::information(this, "excel提示", "文件打开失败");return;}excelEngine->ReadDataToTable(tableWidget);excelEngine->Close();();}}

调用tableweight导入到Excel表格，代码如下：

void QDemandWidget::slotIntoExcel(){excelEngine = new QExcelEngine;filename = QFileDialog::getSaveFileName(this, tr("Save as..."), "../datafile", tr("EXCEL files (*.xls *.xlsx);;HTML-Files (*.txt);;"));if(())return;();bool b = excelEngine->Open(filename, 1, false); //flase为不显示窗体if(b == false){QMessageBox::information(this, "excel提示", "文件打开失败");return;}//清空表格之前的所有内容excelEngine->ClearAllData(" ");excelEngine->Close();//打开数据库，并保存数据// excelEngine->Open(filename, 1, false);// excelEngine->SaveDataFrTable(tableWidget);// excelEngine->Close();();QMessageBox::information(this, "excel提示", "导入成功");}

【领 QT开发教程 学习资料， 点击下方链接莬费领取↓↓ ，先码住不迷路~】

点击这里：